Wheels

• Replacement aluminum quick release skewers

- Supplies full wheel illumination for 700c/29in wheels and smaller - Approximately 40 hrs of battery life - Water resistant design - Includes 3 (AA) batteries - Sold individually (1 wheel) - Easy to install

- Variable widths - Left: 32mm - Center: 52mm - Right: 36mm - Length: 120mm - Overall: 141mm

- Variable widths - Left: 35mm - Center: 52mm - Right: 40.5mm - Length: 127.5mm - Overall: 148.5mm

• Replacement aluminum quick release skewers

• 5mm skewer set (F+R hubs) • Standard 5mm Hex release • Black or Silver anodized finish • Chromoly axles

When motor assistance and leg power meet, the range of terrain a bike can conquer grows almost exponentially. The H 1900 SPLINE is designed for this, now upgraded with the famous DT Swiss Ratchet technology. The Ratchet LN system distributes the combined forces from the rider and the motor over a larger area than the previous pawl freehub systems, increasing the systems’ durability thanks to lower load peaks. The 370 hub enables full power transmission to the ground with reinforced hybrid spokes laced to a resistant aluminum rim, available in two inner widths. - Aluminum rim, Hooked / Crotchet tubeless ready - DT Hybrid 1 spokes are reinforced and increase the lateral and torsional stiffness of the wheel - 370 Hub - Includes Tubeless Valve and Tape, 6-bolt adapter with lockring

Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3

- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing - Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 28mm internal width ideal for 2.2-2.5" tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

The ARC Offset rims utilize an asymmetrical design to optimize spoke tension balance, wheel durability, and wheel stiffness. Its 6069 Alloy construction provides a superior strength-to-weight ratio, significantly improving toughness. - Offset nipple bed for improved spoke tension balance and wheel strength/stiffness - Strong tire retention bead - Tubeless ready

Shimano XT FH-M8010/M8000 Rear Hubs. - Double contact bearing seals - Super polished bearing races for low friction rolling - Shimano Quick-engagement freehub - Not compatible with Shimano 11-Speed Road cassettes - Cone bearings races ground by a Cubic Boron Nitride tool for smooth-rolling durability - Center Lock disc brakes provide reliable braking power (lockring sold separately)

- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs Specs: - Wheel Tire Type: Tubeless Ready - Wheel-Brake Comp.: Disc IS 6-bolt - Rim Material: Aluminum - Spoke Type: Sapim D-Light - Valve: Presta - Rim Construction: Double wall

The reliable rim with an ideal price-to-performance ratio! The jack-of-all-trades of road rims: light, wide, and with an ideal price-to-performance ratio. The R 460 works perfectly with wide tires and will deliver many unforgettable rides on the road thanks to its reliability.

Industry Nine Hydra Classic hubs are the heart of your wheelset, everything revolves around them, literally. Every Classic Hydra hub is made start to finish in Asheville, NC. From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards. - 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control - 6 pawl, 6 phase - 115 tooth drivering - Easily serviced with no proprietary tools. Designed to keep you in the saddle and out of the service queue - Classic j-bend spoke interface - Steel cartridge bearings are durable

Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.

Industry Nine Hydra Classic hubs are the heart of your wheelset, everything revolves around them, literally. Every Classic Hydra hub is made start to finish in Asheville, NC. From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards. - 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control - 6 pawl, 6 phase - 115 tooth drivering - Easily serviced with no proprietary tools. Designed to keep you in the saddle and out of the service queue - Classic j-bend spoke interface - Steel cartridge bearings are durable

- For 37-590 ISO tires only (TIRE2625) - 26x1 3/8 North American size (E.A.3 British Rim/650A French)

Sta Tru Rear Wheel - Single Wall rim - Wheel Size: 18-inch - Cassette Body Type: Threaded Standard 1.37-inch x 24tpi - ISO Diameter: 355 / 18-inch BMX - Valve: Schrader - Tire Type: Clincher - Rear Axle: 3/8-inch Threaded x 110mm

Sta-Tru Double Wall Rear Wheels. - Wheel Size: 20-inch - ISO Diameter: 406 / 20-inch BMX - Valve: Schrader - Tire Type: Clincher

Sta Tru Rear Wheels - Single Wall rim - Wheel Size: 20-inch - ISO Diameter: 406 / 20-inch BMX - Valve: Schrader - Tire Type: Clincher

The Muc-Off Ultimate Tubeless Kit contains everything needed to get a tubeless-ready wheelset set up and ready to roll. Each Kit contains Tubeless Rim Tape, two CNC-machined black tubeless valves and two pouches of No Puncture Hassle Tubeless Sealant.

Industry Nine Hydra Classic mountain hubs are loaded with features every rider will appreciate such as revolutionary 0.52° engagement, generously low weights and an intuitive layout that can be serviced without any proprietary tools. - From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards in Asheville, NC - 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control - Classic j-bend spoke interface - Steel cartridge bearings are durable - Easily serviced with no proprietary tools; Designed to keep you in the saddle and out of the service queue

- Grade 3 balls and magnetite rust proof finish - Abec 5 precision and silicone w seals - 3 times cryogenic race treatment - Bearings sold individually, not as pair

Zipp's 353 NSW Tubeless Disc-brake wheel is the pinnacle of our pursuit of versatility and speed. This wheel fuses Zipp's two most advanced approaches, Sawtooth rim profile and TSE, for an all-encompassing approach to performance. With its undulating 45mm-deep rim shape, the 353 NSW provides speed on every terrain with best-in-class aerodynamic efficiency and crosswind stability. The 353 NSW is Zipp's lightest tubeless wheel yet, making it a fast-puncher ready to fight its way into the breakaway. Zipp's use of hookless (straight side) rims in the 353 NSW is integral to achieving our mission of Making You Faster. With hookless, the transition between the tire and the rim is more seamless and aero. Zipp's hookless rims have more efficient resin distribution, which means lighter wheels. They also are highly durable. Zipp's 353 NSW's Sawtooth rim shape with Hyperfoils optimizes aerodynamic efficiency and crosswind stability. The Sawtooth design also allows the rim to be structurally strong but light. That will help you snap out of corners and maintain that speed no matter the terrain, especially in the steep, punchy stuff. The 353 NSW utilizes Zipp's Total System Efficiency, or TSE, approach to wheel design: overcoming specific barriers to speed: wind resistance, gravity, rolling resistance, and vibration losses. The wheel's 25mm internal width is ideal for running wider tubeless tires at reduced air pressure for a more efficient ride. At the center of the 353 NSW is the Cognition V2 Hubset, re-engineered with an updated Axial Clutch V2 mechanism for quicker engagement and lower friction, as well as improved durability. - Versatile endurance wheel for the modern road bike with tubeless and hookless rim profile - Our lightest tubeless wheel yet, making it a fast-puncher ready to fight - Optimized tire bed for easy tire installation - TSE for greater efficiency and reduced rolling resistance - Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stable performance with an undulating rim depth - Cognition V2 hubset rolls efficiently whether you are pedaling or coasting. Its Axial ClutchV2 technology reduces drag and lowers friction - Ships with 12mm end caps - Center Lock rotor interface. Lockring is included - Zipp graphics applied using Zipp's ImPress direct-print technology - Lifetime warranty

Chris King Boost 6-Bolt 148x12 rear hubs are designed as precision mountain tools. We use one-piece solid axles to provide a stiff hub that will help your suspension perform better and drive every watt of power into the dirt. To thwart mud, water, and contaminants as you power through rough trails, Boost 6-Bolt hubs have heavy-duty bearing seals, and a threaded driveshell seal ring. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. The patented Chris King RingDrive with 72-points of simultaneous-engagement will get your power to the ground fast, provide unmatched engagement, and give you that legendary Chris King angry-bee sound. - Steel Bearings - Engineered, manufactured and assembled in Portland, Oregon USA - King Lifetime Warranty - Canted flanges for stronger wheel builds - Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement - Legendary made-in-house bearings - Come in 28h and 32h drilling - Available with Micro Spline, HG or XD driveshell. - Easily serviceable with a 2.5mm hex and pick or pen knife - Completely re-buildable with our ISO Hub Service Tool - Responsibly lightweight - Ceramic bearing upgrade available - Specifically designed for "BOOST" 148mm x 12mm axle standard

Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.

Today's XC race machines are marvels of modern engineering, evolved to decrease weight while improving ride quality and durability, with the idea to carry the world’s best athletes to the top step of the podium.The Reserve 28 XC is the race-ready culmination of everything learned from years at the highest levels of competition, and it delivers on a heap of promises. At a genre blurring 1300g for a complete wheelset (with no rider weight limit and our market-defining lifetime warranty), the 28 XC features a wider and lower rim profile to increase strength and lateral rigidity, while adding vertical compliance for enhanced traction. - Designed for XC riding and racing - Carbon fiber construction with 2.8mm asymmetric offset - Step-in internal rim bed to ease tubeless installation - Lower profile for added lateral stiffness with increased vertical compliance - Ships with rim tape installed, tubeless-ready valves, and cards identifying the Santa Cruz builder of each of your wheels - Backed by Santa Cruz lifetime warranty

Today's XC race machines are marvels of modern engineering, evolved to decrease weight while improving ride quality and durability, with the idea to carry the world’s best athletes to the top step of the podium.The Reserve 28 XC is the race-ready culmination of everything learned from years at the highest levels of competition, and it delivers on a heap of promises. At a genre blurring 1300g for a complete wheelset (with no rider weight limit and our market-defining lifetime warranty), the 28 XC features a wider and lower rim profile to increase strength and lateral rigidity, while adding vertical compliance for enhanced traction. - Designed for XC riding and racing - Carbon fiber construction with 2.8mm asymmetric offset - Step-in internal rim bed to ease tubeless installation - Lower profile for added lateral stiffness with increased vertical compliance - Ships with rim tape installed, tubeless-ready valves, and cards identifying the Santa Cruz builder of each of your wheels - Backed by Santa Cruz lifetime warranty

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

Industry Nine Hydra Classic hubs are the heart of your wheelset, everything revolves around them, literally. Every Classic Hydra hub is made start to finish in Asheville, NC. From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards. - 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control - 6 pawl, 6 phase - 115 tooth drivering - Easily serviced with no proprietary tools. Designed to keep you in the saddle and out of the service queue - Classic j-bend spoke interface - Steel cartridge bearings are durable

- Zipp's most advanced and fastest deep-rim wheel for road, triathlon, and time trialing - More than 300 grams lighter that previous model - Optimized tire bed for easy tire installation - Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stability performance with an undulating rim depth - Cognition V2 hubset rolls efficiently whether you are pedaling or coasting. Its Axial Clutch V2 technology reduces drag and lowers friction - Center locking rotor interface. Lockring is included with the wheels - Zipp graphics applied using Zipp's ImPress direct-print technology - Minimum 25mm tire width - Lifetime Warranty

Dust off that truing stand for a fresh wheel build. Genuine replacement parts Whether it's a custom build or just a replacement, these hubs are the foundation for a high-quality wheelset. - Bontrager rear hub for use with 142mm dropouts - Flange diameter: 58mm - NDS flange offset: 32mm - DS flange offset: 18.5mm - 28 hole, 6-bolt rotor - Equipped with Shimano freehub, SRAM XD is available separately - Rapid Drive 108 hub quickly and efficiently transfers effort into forward motion

Upgrade or refresh your Bontrager wheels. Genuine replacement parts Whether you're looking to upgrade to the newest and freshest drivetrain or simply hoping to refresh your trusty wheelset, Trek Genuine Replacement Parts have you covered. - Replacement freehub body - Compatible with Bontrager Pro-level hubs

Upgrade or refresh your Bontrager wheels. Genuine replacement parts When it's time to refresh your trusty wheelset, Trek genuine replacement parts have you covered. - Replacement freehub body - Compatible with Bontrager hubs using the DT Ratchet EXP platform - For use with Shimano HG cassettes - Includes 12mm thru-axle end cap

Dust off that truing stand for a fresh wheel build. Genuine replacement parts Whether it's a custom build or just a replacement, these hubs are the foundation for a high-quality wheelset. - Bontrager rear hub for use with 148mm dropouts - Flange diameter: 58mm - NDS flange offset: 35.5mm - DS flange offset: 21.5mm - 28-hole, 6-bolt rotor - Available with Shimano or SRAM XD freehubs - Rapid Drive 108 hub instantly transfers effort into forward momentum

- Replacement straight pull spokes for Zipp 88 (Front) and 188 (Rear) Hubs

Just wide enough, just light enough. At 30mm internal rim width the M 1700 SPLINE 30 works for tires ranging from slightly wide to quite wide, allowing it to attack the hardest terrain. But with a high-end build, butted spokes, patented alloy Pro Lock nipples and the benchmark Ratchet System hubs, it still comes in at a low weight. Low weight means it's very reactive to rider input. Reactive means fun, and fun is why we are all doing this, right?

It's a fact: On an E-MTB you run into trail sections much faster than you have ever before considered possible. The H 1700 SPLINE 30 has the power to get you out of such situations as a winner and not face down in the dirt. Steering precision is covered by the strong spokes and the trademark DT Swiss wheel build with high and even spoke tension. The rim can take tires suited for fast riding on rugged terrain and supports them perfectly, even at low pressures. Reliable Ratchet System hubs finally make sure that you can come back and attack those gnarly sections of trail time and time again.

Unsure what will happen on your group ride? Mountains, hills, or flat sections? Water from below, water from above? You needn't worry — the PRC 1400 SPLINE 35 has it covered. High-end bladed straight pull spokes and the most reliable and lightweight freewheel system make for an efficient ride. Offering the perfect blend of comfort, grip, and low weight in combination with a higher volume tire, the wide and stiff full carbon rims accelerate with the best of them.

Rainy days, wet soil, rocks and roots. The tubeless tires somehow find grip. The M 1700 SPLINE 25 comes stock with tubeless rim tape and valves, just the right tool for demanding trails. The wide rim gives the tire that decisive little bit more support while the Ratchet System freewheel ensures safe engagements even in the most averse conditions. Finally, being a lightweight helps you to quickly get back up to that trail entrance, to start the slip-and-grip fest all over again.

With even the EWS race courses getting tougher and tougher and tire manufacturers offering Enduro-strong tires in 2.5-inch sizes, the demand from DT's pros for a wide, Enduro tough wheelset came up and DT responded by developing the EX 1501 SPLINE ONE 30. Often used as a front wheel to generate as much grip where you need it most, it is the wheel for those hunting after the toughest of tracks or those living right in the Alps. Strong, lightweight, and tough as nails, the EX 1501 30 is ready for just about anything.

Surly's low-profile, bolted Thru-Axles are specifically designed for use with Surly thru-axle compatible frames. Not sure which one fits your bike? Get in touch, and we'll ensure you're choosing the correct axle for your application.

Shimano's Deore Front Hub offers durability and fast, smooth riding. It features a high-quality cold-forged aluminum shell, super durable angular contact bearings with high-polish bearing surfaces, and Shimano's easy-to-use Center Lock disc mount. The included quick-release skewer makes wheel installation and removal a breeze.

Did you feel that? Your bike just got faster with Crank Brothers' Cobalt 3 27.5-inch Wheelset. These flyweight wonders boast tubeless-compatible aluminum rims that keep the weight down to a feathery 1,650 grams for the set and they boast machined aluminum hubs with sealed bearings that feel like they'll spin forever. The spokes connect at a vertical rib, thus eliminating the need for spoke holes in the rim to enhance durability. Plus, the extended aluminum nipples simplify the truing process and optimize wheel stiffness.

The Mission Engage rear cassette wheel is a fully sealed hub, 3-cross laced to the rugged Mission Mylar double wall rim. Heat-treated chromoly axle, 5 precision sealed bearings, and stainless-steel spokes make the Engage wheel a solid ride. - Hub: Mission Engage Cassette - Rim: Mission Mylar - Weight: 46.1oz

Proterra Tough i30 wheels keep the trail in check while everything else blurs by in the periphery. Reinforced by our proven Dual I-Beam support, Proterra Tough rims feature a 30mm internal width to provide higher tire volume while also increasing sidewall support at lower pressures. High-quality EZO sealed bearings are designed to endure through seasons of aggressive riding, while a responsive 6-pawl freehub provides the snappy 3.7 degrees of engagement you demand when cranking out of corners. Choose Proterra Tough when you need a wheel that won't let you down. - 30mm inner rim width with 32 spokes laced in a 3-cross pattern - 6069 aluminum alloy rim is TCS 2.0 tubeless-ready - Sapim Secure Lock 14-gauge brass nipples provide bomber durability, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze. - Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke. - 6-bolt rotor mounts - Top-tier EZO sealed bearings

- 6 pawl/48 point/7.5-degree engagement - Cassette bodies for Elite Series RD-1110 hubs - Sealed bearings - Material: AL7075

- Forged alloy construction - Sealed Cartridge bearings - Double contact seals - 6-bolt disc - 12x142mm rear spacing - Aluminum hub body

Replacement Freehub body for OOZY Trail R142/135, SPIKE R135/142, or SPIKE DH R150/157 Rear hubs. Compatible with all OOZY hubs and wheels. Compatible only with SPIKE and SPOON wheels (135mm and 150mm) produced in 2016 or later (with SPIKE hubs).

3-pack, 298mm CX-Sprint Straight-Pull External Black Roam 60 29 Wheels

- Elite Series convertible road disc hubs - Available in multiple axle configurations - Shimano and Campagnolo cassette body options with 6 pawl/48 point/7.5° engagement - Straight pull and J-bend spoke options - 6 bolt and Center Lock disc brake rotor options - Sealed bearings - Material: AL6061 Straight Pull Spoke/QR Axle: PCD-L: 35mm PCD-R: 49mm LTF-L: 32.75mm LTF-R: 50.05mm CTF-L: 34.9mm CTF-R: 17.6mm Straight Pull Spoke/12mm Thru-Axle: PCD-L: 35mm PCD-R: 49mm LTF-L: 36.25mm LTF-R: 53.55mm CTF-L: 34.9mm CTF-R: 17.6mm J-Bend Spoke/QR Axle: PCD-L: 45mm PCD-R: 50.6mm LTF-L: 32.65mm LTF-R: 48.2mm CTF-L: 35mm CTF-R: 19.45mm J-Bend Spoke/12mm Thru-Axle: PCD-L: 45mm PCD-R: 50.6mm LTF-L: 36.15mm LTF-R: 51.7mm CTF-L: 35mm CTF-R: 19.45mm

- AL6061 alloy tubeless Presta valve - Includes 2 O-rings, one standard profile and one aero profile, for an airtight seal on any rim - Removable valve core for installing sealant - Additional replacement valve cores sold separately - Sold individually

The best price on the market for a wheel meant to be ridden. Single-wall rims and loose-ball hubs that come out of the box round and true.

If you need just one wheel for on-the-spot repairs, this wheel features both rim brake and disc brake compatibility.

The best price on the market for a wheel meant to be ridden. Single-wall rims and loose-ball hubs that come out of the box round and true.

- Flanged 15mm axle nuts - Durable chromoly construction - Spacing / Axle: B/O

The Rampage rear wheel features a sealed bearing hub, 14mm axle and a Rampage double-walled rim. - Includes Stolen PVC rim strip - Brake Compatibility: Rim Brake - Wheel Size: 20" - ISO Diameter: 406 / 20" BMX - Valve: Schrader - Tire Type: Clincher - Axle: 3/8" chromoly (Heat-treated) - Hardware: Steel (17mm wheel nuts) - Hub Shell Bearings: 6000 (x2) Verify bearing number on side of rubber seal - Spokes: 187mm (3X) Black w/ Black Brass nipples - Drilling: 36h only - Weight: 32.5 oz

Replacement freewheel spoke protector, in various sizes for different freehub sizes. - Made of clear plastic - Fits around standard freewheel threads

Choose to ride even faster by using CeramicSpeed Hub Bearings in your wheels. The DT Swiss-3 wheel kit fits 240s Disc hubs. Other kits are available for DT 240s rim brake hubs, and DT180 as well. The high velocity of wheel bearings means that bearing friction can have a huge impact on performance. CeramicSpeed Wheel Bearings have a proven lifespan, which is 3-5 times longer than standard wheel bearings. In The Box: - 2 x 61903/18 bearings - 2 x 61802 bearings - 2 x 61902 bearings - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet Remember to add grease and mount seals before installation.

After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes. - Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles. - Low Profile—No more bulky handles to strike trail obstacles. Aerodynamic design. - Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength. - Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal. - Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding.