Parts

The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.

Race Face steel chainring bolts. Includes four sets of 12mm bolts/nuts for inner and outer chainrings.

- Stock steel chainring bolts found on low/mid-range Race Face cranks - For double cranksets

Replacement spindle spacers for Race Face X-Type XC/AM cranksets.

Hardware is specifically designed for, and only compatible with, Salsa frames using the Alternator 2.0 dropout system. - For use on 2017 and newer alternator 2.0 Adjustable plates only - Please reference hardware kit FS2351 for fixed position plates - Please reference hardware kit FS2350 for adjustable plates

All-City replacement bolts and adjustment springs for the Hennepin Bridge and Space Horse dropouts. - Sold as a pair; two bolts and two springs - M4x0.7mm thread - Length: 45mm

The Enduro contact silicone seal is the same new universal face seal that comes with Enduro TorqTite Solid-Lube bottom brackets for SRAM DUB cranksets - Contact face seal seals directly to the bearing OD to make it a more universal fit - Apply a thin film of grease on the back side of the seal for optimum seal performance

FSA Mega Exo Small Parts.

The flangeless Kink Ace grips feature a super comfortable wrapped style pattern, that may look a bit familiar to a lot of riders. The combination of both thick and thin ribs creates a mixture of comfort, grip, and support. Soft Kraton rubber material and a mid-sized 29mm diameter give these grips a perfect traditional feeling. Flush plug style barends are included with the grips, fully protecting them from rips and tears. - Material: Soft Kraton Rubber - Length: 150mm - Diameter: 29mm

RockShox 35mm Seal Kit

Hose Kits, Barbs and Strain Relief for Servicing Reverb Lines.

Internal components for servicing the Reverb and Reverb Stealth mechanism.

Internal components for servicing the Reverb and Reverb Stealth mechanism.

- Parts listed are for servicing and overhauling a single master cylinder/lever assembly

Alternator 1.0 Set Screws

Shimano Dura-Ace R9100 Cassette Spacers

- 3-spline steel cogs for use with Sturmey 3-speed (and 5-speed) internal gear rear hubs - Flat or dished for tuning chainline. Xylan coating for greater durability

CAMO Chainring Bolt Kit are designed specifically for use with CAMO spiders and rings - Includes 5 Torx head M5 x 8mm bolts - ED coated steel is durable - Bolts include a blue Nylok patch for a secure installation - Torque bolts only to 4-5 Nm and use blue Loctite threadlock

CAMO Chainring Bolt Kit are designed specifically for use with CAMO spiders and rings - Includes 5 Torx head M5 x 8mm bolts - ED coated steel is durable - Bolts include a blue Nylok patch for a secure installation - Torque bolts only to 4-5 Nm and use blue Loctite threadlock

CAMO Chainring Bolt Kit are designed specifically for use with CAMO spiders and rings - Includes 5 Torx head M5 x 8mm bolts - ED coated steel is durable - Bolts include a blue Nylok patch for a secure installation - Torque bolts only to 4-5 Nm and use blue Loctite threadlock

Zipp Speed Weaponry Bolt Kits

Saddle clamp heads and lowers for KS Dropper posts.

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

- Compatible with most side- and center-pull brakes - Excellent for BMX and freestyle - Hex nut type - All-weather compound

Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.

Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.

- Fits cantilever brakes - Sold individually

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

- Eva foam provides excellent vibration damping, reducing road buzz - Blended natural cork, helps absorb sweat and resists heat caused by friction - Includes end-plugs and finishing tape

- Grade 10 chromium steel balls

- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact

Designed for maximum comfort, ergonomics, & durability - Bag of 10

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

- Grade 10 chromium steel balls

- Grade 10 chromium steel balls

Compression ring fits above the upper bearing in a Cane Creek headset to ensure vertical and horizontal compression is optimal. - Compatible with 41mm and 42mm OD upper bearings

Basics brake cable and housing set provide replacement level quality in an easy-to-use double ended package. - Non-extruded galvanized inner cable - Compatible with Mountain and Road for Shimano/SRAM - Lead-free PVC housing - Enough cable and housing for one brake - Black

Basics shift cable and housing set provide replacement level quality in an easy-to-use double ended package. - Non-extruded galvanized inner cable - Lead-free PVC housing - Double ended for SRAM/Shimano and Huret/Simplex - Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters - Color: Black - Diameter: 1.2mm - End Type: Shimano/SRAM - Housing Diameter: 5mm

Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - SRAM/Shimano mountain compatible cable end - Stainless steel construction resists corrosion - Single end cable features weld-cut for easy installation

Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth and ensures your cables last as long as possible. You get a bag of 10.

Odyssey A Brake shoes for all your braking needs.

The Graduate sleeve is the replacement sleeve for the Graduate peg that's made from long lasting, fast sliding plastic. - Sold singly

Spacers to insure proper chainline and chainring spacing on your bike. - 3.5mm thick - Material: alloy

Converting from V-brake to disc? Plug the holes with Origin-8 Boss Plugs. Boss plugs provide a finished look to your brake conversion while also preventing moisture and debris from getting into your bike. - Fits into fork brake boss holes for V-brake to disc conversion

Problem Solvers' 11-speed Freehub Spacer converts your 11-speed freehub body to accept a 10-speed casssette. Use this spacer if you are running a 10-speed drivetrain on a new set of wheels with a 11-speed freehub body. The spacer is 1.85mmm thick.

The Problem Solvers Steerer Tube Shims are for installing 1-1/8-inch diameter threadless stems on 1-inch diameter threadless forks. The shim is made of light, durable anodized aluminum and is chamfered on the ends for easy stem installation.

Race Face Crank Arm Fixing Bolts - For EXI Cranks - Bolt Puller Cap Washer for self-extracting bolt

Replacement spindle spacers for Race Face X-Type FR/DH cranksets.

Replacement hardware kit for Salsa Alternator Flat Mount dropouts. - For use only on frames designed for the Alternator Flat Mount standard

Made of Stolen's proprietary Thermalite material, the sleeve resists cracking and deformation while sliding better than chromoly on most surfaces. These sleeves come stock on the Stolen Silencer & Fiction Troop pegs and will also fit over our chromoly Barrel Peg (with axle washer). - Length: 4.4-inch - Diameter: 1.6-inch - Material: Plastic (Thermalite) - Weight: 0.8- ounce each - Replacement sleeve only - Sold individually

This is a replacement sleeve for Jake Seeley’s signature peg. It features a proprietary plastic blend that slides nice when you’re on the grind, and sticks when you want to stall a bit. - Aluminum Jake Seeley peg cores sold separately - Replacement sleeve sold individually

- Cartridge Bearing - 1-3/8-inch Outer Diameter

- Vision Aero/reverse brake lever specific brake cable - Replacement cables that only work with Vision reverse brake levers - Sold individually

- Replacement barrel adjuster for FR5 and SD7 levers - Includes one pair

FSA Service Parts for BB30 Frames

FSA Service Parts for BB30 Frames

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC and Shimano 10-speed chains - Includes 2 pairs

Flat Mount Disc Caliper Bracket Bolts