Parts

BBright is the Cervelo bottom bracket standard found on most of their frames, save the P5. In order to fit Shimano and FSA cranks into this oversized shell, this bottom bracket, complete with CeramicSpeed Bearings, needs to be pressed in. The BBright bottom bracket comes with either CeramicSpeed Standard or Coated Bearings installed. Super smooth, super-round CeramicSpeed Balls contained in hardened-steel races are found on both versions. The Coated version has a metallic coating laid onto the races, making it even smoother and harder, resulting in lower drag and longer life. BBright is similar to BB30, but is wider on the non-drive side. As such, the bottom bracket for running 24mm diameter cranks from Shimano, FSA, and others, is unique. The CeramicSpeed Standard Bearings last at least three times longer than other bearings. Thanks goes to hardened-steel races and CeramicSpeed Balls that are 100% smoother and 15% harder than the ceramic competition. These have a frictional drag of 0.3-0.4 watts per set, which represents an average 75% drag reduction compared to most BBs. The CeramicSpeed Coated Bearings reduce drag by 50% compared to CeramicSpeed Standard Bearings, and show an improvement in bearing life by 60%. In The Box - 1 bottom bracket with bearings installed - 2 dust covers - 10ml syringe of All Round Grease - Sticker sheet

The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design, while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed Bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. The BSA for SRAM DUB Road comes in two versions. The first is our low drag, long life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second is our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Compatible with: - Frame: BSA - Opening diameter: Threaded - Shell width: 68mm In the box: - 2 cups with CeramicSpeed Bearings installed - 2 dust covers - 4 x 1mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet - Spacertube

BSA is another way of stating English threading. The initialization comes from Birmingham Small Arms, which made bicycles. English threading on road bikes mean a 68mm wide, 34mm inside diameter shell with reverse threading on the drive side. It's the most common threaded standard employed today. This kit works with 24mm diameter cranks, found on cranks from Shimano, FSA, Rotor, and others. Choose between two bearings for the cups. Standard Bearings have low drag thanks to hardened-steel races and our Ceramic balls. Coated Bearings have those same balls installed on coated, hardened-steel races for longer life and less bearing drag. 24mm spindles easily fit through the shell and allow for large bearings to be employed in the outside cups. Put more of your energy into forward motion by reducing frictional drag wherever you can. CeramicSpeed Standard Bearings typically have frictional drag of 0.3-0.4 watts per set. That's in the range of a 75% drag reduction compared to standard bottom brackets. CeramicSpeed balls are 100% smoother and 15% harder than ceramic competition. The bearings last at least 3x longer than other bearings. In The Box: - 2 threaded cups with bearings - 2 dust covers with built-in spacers - Spacer tube - 10mm syringe of All Round Grease - Sticker sheet

BSA is another way of stating English threading. The initialization comes from Birmingham Small Arms, which made bicycles. English threading on road bikes mean a 68mm-wide, 34mm-inside-diameter shell with reverse threading on the drive side. It's the most common threaded standard employed today. This kit allows you to fit 30mm cranks, like those from Rotor, to fit in the tight space of this 34mm spindle. Choose between two bearings types for the cups. Standard Bearings have low drag thanks to hardened-steel races and our CeramicSpeed Balls. Coated Bearings have those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Note that the threaded extensions of this BB's cups that thread into the frame are thin, as they need to fit a 30mm spindle inside the cups. CeramicSpeed standard bearings typically have frictional drag of 0.3-0.4 watts per set. That's in the range of a 75% drag reduction compared to standard bottom brackets. That's thanks to balls that are 100% smoother and 15% harder than the ceramic competition. The bearings last at least 3x longer than other bearings. In The Box: - 2 threaded cups with bearings installed - 2 1mm spacers - 2 0.5mm spacers - 2 dust covers - O-ring - 10ml syringe All Round Grease - Sticker sheet - Spacertube

The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. The EVO386 for SRAM DUB Road comes in two versions. The first version uses our low drag, long life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second version uses our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Compatible with: - Frame: EVO386 - Opening diameter: 46mm - Shell width: 86.5mm In the box: - 2 cups with CeramicSpeed Bearings installed - 2 dust covers - Spacer-tube - 4 x 1mm spacers - 2 x 3mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet

The EVO386 standard is designed for oversized spindles. CeramicSpeed's kit for Shimano allows you to install Shimano or FSA cranks with 24mm spindles. The cups come with CeramicSpeed Bearings installed. Both CeramicSpeed Standard and Coated Bearings are available. Both utilize super smooth CeramicSpeed Balls and hardened-steel races. The latter has an additional metallic coating on the races to further smooth and harden the steel, further increasing life and lowering drag. The design of overlapping cups extending through the shell for EVO386 reduce the likelihood of creaking and increase the reliability of the system. The CeramicSpeed Standard Bearings feature an average drag reduction of 75% compared to stock bottom brackets. That translates into frictional drag of 0.3-0.4 watts per set, which is the result of great design, hardened-steel races, and ceramic balls that are 100% smoother and 15% harder than the ceramic competition. The CeramicSpeed Coated Bearings are a step up as they reduce drag by 50% compared to our Standard Bearings and an improvement in bearing life by 60%. All Round Grease comes standard in the bearings, but can be replaced for lower drag TT and Track Grease or higher durability LongLife Grease, which adds a bit of drag but stays in the bearing when riding through messy conditions. In The Box: - 1 bottom bracket with bearings installed - 2 dust covers - 10ml syringe of All Round Grease - Sticker Sheet

The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design, while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. The ITA for SRAM DUB Road comes in two bearing options. The first option is our low drag, long life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second option is our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Compatible with: - Frame: Italian BB - Opening diameter: Threaded - Shell width: 70mm In the box: - 2 cups with CeramicSpeed Bearings installed - 2 dust covers - 4 x 1mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet - Spacer tube

Italian-threaded bottom bracket shells are typically found on Italian-brand road bikes. The shell measures 70mm wide and has a 35mm inner diameter. This kit has all the pieces necessary to install 24mm diameter cranks, such as those from Shimano, FSA, and others into an ITA shell. CeramicSpeed bearings are pressed into threaded cups, then those cups are threaded into the frame. You choose whether you want yours equipped with Standard or Coated Bearings. Super-round, super-smooth CeramicSpeed balls rotate in hardened-steel races in both. The Coated version has a metallic coating laid onto the races, making them even harder and smoother, resulting in longer life and lower drag. ITA BBs, thanks to the popularity of Italian road bike design, still have a following. The drive-side cup needs to be properly secured, but once that's done, the system is excellent. 24mm cranks work better when mated to our bearings. To make your bike as efficient as possible, you must reduce mechanical drag. Bottom brackets have a measurable effect on speed. CeramicSpeed balls are 100% smoother and 15% harder than the ceramic competition. They run on smoother races, too. That means our Standard Bearing BBs have 75% less drag compared to typical bottom brackets. And, the bearings last at least 3x longer than other bearings. These bearings come packed with All Round Grease. If you want less drag and are riding in cleaner environs, install lowest drag TT and Track Grease. If you're riding in wet conditions, more durable LongLife Grease can be put in. In The Box: - 2 threaded cups with bearings - 2 dust covers with built-in spacers - Spacer tube - 10ml syringe of All Round grease - Sticker sheet

The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. The PF30 for SRAM DUB Road comes in two versions. One version uses our low-drag, long-life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second version uses our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Compatible with: - Frame: PF30 - Opening diameter: 46mm - Shell width: 68mm In the box: - 2 cups with CeramicSpeed Bearings installed - 2 dust covers - Spacer-tube - 4 x 1mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet

The PF30 standard is widely used. To make it compatible with Shimano and other 24mm diameter cranks, as well as improve the system, select this bottom bracket. The package comes with two cups and CeramicSpeed Bearings installed. The cups have extended inner sleeves and join with a center section, reducing the likelihood of creaking and increasing the reliability of the system while also eliminating spindle rub on internal cables. The cups mate with 24/22mm crank spindles. There are two bearing options. Both Standard and Coated Bearings feature super smooth CeramicSpeed Balls and hardened-steel races. The CeramicSpeed Coated Bearings have an additional feature: a 3-micron thick metallic layer over the races. This addition makes the races smoother and harder, lowering drag and increasing life. The CeramicSpeed Standard Bearings have only 0.3-0.4 watts of frictional drag per set, an average drag reduction of 75% compared to stock bottom brackets. This is the result of great design, including hardened-steel races and CeramicSpeed Balls that are 100% smoother and 15% harder than the ceramic competition. They also last longer. The CeramicSpeed Coated Bearings last even longer and feature even lower drag. Life increases by 60% and drag drops by 50% compared to our CeramicSpeed Standard Bearings. All Round Grease is installed in the bearings. It can be replaced for lower-drag TT and Track Grease or higher-durability LongLife Grease, which adds a bit of drag but stays in the bearing when riding through messy conditions. In The Box - 1 bottom bracket with bearings installed - 2 dust covers - 10ml syringe of All Round Grease - Sticker sheet

The PF4130 bottom bracket is Press Fit into 41mm diameter shells that are 86.5mm wide and mate most cranks with a 30mm spindle to that standard. If you have a BB86 frame and want to install a 386EVO crank or Rotor 30mm crank, this is the kit you need. CeramicSpeed bearings are installed in cups. The Standard Bearing has ceramic CeramicSpeed balls and hardened-steel races. The Coated Bearing has the same balls running on hardened-steel races with a 3-micron-thick metallic coating making the races harder and smoother, increasing service life and reducing friction. Enjoying the benefit of a massive, strong, and light 30mm crank spindle in your BB86 frame is possible with this kit. Press in the cups, set up the wave washer, add spacers if necessary, and torque down. CeramicSpeed's bottom bracket is also stiff and light, but its greatest benefits come in the form of drag reduction. Standard Bearings with stock grease typically have frictional drag of 0.3-0.4 watts per set. That's about a 75% drag reduction compared to conventional bottom brackets. The bearings also last at least three times longer than other bearings. Performance can be tuned by replacing grease. All Round comes with this BB, but you can change it to TT and Track Grease for less drag or to LongLife for greater durability. In The Box - 2 cups with bearings installed - 2 1mm spacers - 2 0.5mm spacers - 2 dust covers - O-ring - Plastic cable protector - 10ml syringe All Round Grease - Sticker sheet

This bottom bracket is perfect for when you have a PF30, BBright, or 386EVO shell frame and want to install a crank with a 30mm spindle into the frame. All these frame standards have a 46mm inner diameter and smooth insides, though the widths vary from 68mm to 86mm. This bottom bracket features nearly zero loss of power due to friction, thanks to the CeramicSpeed's incredibly efficient bearings. Choose either our Standard or Coated Bearings—both have super-round, super-smooth CeramicSpeed balls rolling on hardened-steel races. The Coated version has a metallic coating laid onto the races, making them even harder and smoother and resulting in longer life and lower drag. They come installed in cups. 30mm spindles on cranks are increasingly popular because of the high stiffness and low weight. 46mm inner diameter bottom brackets are popular for the freedom they offer designers in building frames. Because of the variety of widths, the cups here extend into the shell and come with a telescoping spacer tube to further seal and stiffen the system. The bottom bracket is already stiff thanks to hard ceramic bearings and hardened-steel races. Thanks to CeramicSpeed, it also generates nearly zero drag. Standard Bearings typically have frictional drag of 0.3-0.4 watts per set. That's in the range of a 75% drag reduction versus conventional BBs. The bearings also last at least 3x longer than other bearings. You can change the grease to fine-tune your BB's performance characteristics. TT and Track, All Round, and LongLife are greases CeramicSpeed designed. The first has the least drag, while the last is the most durable. All Round, in the middle, comes standard in road bearings. In The Box - 2 cups with bearings installed - 2 1mm spacers - 2 0.5mm spacers - 2 dust covers - O-ring - Spacer tube - 10ml All Round Grease - Sticker sheet

These bottom brackets are equipped with hand-built coated bearings specially developed for off-road performance that offer extreme durability and feature a unique design for SRAM DUB 28.99mm cranks. Coated bearings utilize the highest-quality CeramicSpeed ceramic balls, running on hardened-steel races with a 3-micron-thick metallic coating that makes the races corrosion-resistant, harder, and smoother, increasing service life and reducing friction. - This product has a unique design specifically for SRAM DUB 28.99mm cranks - Native fit frame interface and no plastic adapters or excess spacers - This design features a custom integrated dust cover for maximum durability In the box: - 2 CeramicSpeed Bearings - 2 dust covers - Plast sheet - 1 x 3mm spacer - 2 x 1mm spacers - 10ml syringe of CeramicSpeed Long Life Grease - Sticker sheet

The BB86 mountain bike standard was designed to integrate bearings into the bottom bracket for weight reduction. This kit works with the standard: it consists of two cups that are pressed into either side of the shell. There are two versions of this bottom bracket. Both come with CeramicSpeed Bearings installed into cups. The first is our long-life, low-drag Standard Bearing with hardened-steel races and our CeramicSpeed super-round, super hard balls. The second is our Coated bearing, which uses those same CeramicSpeed Balls installed on coated, hardened-steel races for longer life and less bearing drag. This CeramicSpeed BB86 Bottom Bracket meshes with cranks that have 24mm spindles, including both Shimano and FSA. CeramicSpeed standard Bearings typically have frictional drag of 0.3-0.4 watts per set. That means an average 75% drag reduction compared to standard bottom brackets. The hardened-steel races feature CeramicSpeed Balls that are 100% smoother and 15% harder than the ceramic competition. The CeramicSpeed Bearings last at least three times longer than other bearings. Coated Bearings drop friction further and increase lifespan to applying a coating to the races. The coated races see a 50% drag reduction and an improvement in bearing life of 60%. In The Box - 2 bottom bracket cups with bearings installed - 2 dust covers with integrated spacers installed - Spacer tube - 10ml syringe of LongLife Grease - Sticker sheet

BSA is equivalent to English threading. English threading on MTBs mean a 73mm-wide, 34mm-inside-diameter shell with reverse threading on the drive side. It's the most common threaded standard employed today. This kit works with 24mm diameter cranks, such as Shimano, FSA, Rotor, and others. Choose between two bearing types for the cups. Standard Bearings have low drag thanks to hardened-steel races and our Ceramic balls. Coated Bearings have those same balls installed on coated, hardened-steel races for longer life and less bearing drag. For MTBs, English threading, thanks to history, is pretty much the one threaded standard. It works great. 24mm spindles easily fit through the shell, allow for large bearings to be employed in the outside cups. What's more, they rarely creak and seal up well. Lots of things slow bikes down; bearings shouldn't be among them. CeramicSpeed Standard Bearings typically have frictional drag of 0.3-0.4 watts per set. That's in the range of a 75% drag reduction compared to standard bottom brackets. The bearings last at least 3x longer than other bearings. Coated bearings have even less drag. These bearings come packed with LongLife Grease, best for muddy conditions. For less drag when riding in cleaner environs, you can coat the bearings with either All Round Grease or lowest drag TT and Track Grease, which is designed for clean conditions. In The Box - 2 threaded cups with bearings - 2 dust covers with built-in spacers - Spacer tube - 10ml syringe of LongLife grease - Sticker sheet

BSA is equivalent to English threading. English threading on road bikes mean a 68mm-wide, 34mm inside diameter shell with reverse threading on the drive side. It's the most common threaded standard employed today. This kit works with 24mm diameter cranks, such as Shimano, FSA, Rotor, and others. Choose between two bearings for the cups. Standard Bearings have low drag thanks to hardened-steel races and our Ceramic balls. Coated Bearings have those same balls installed on coated, hardened-steel races for longer life and less bearing drag. English threading is easy to work with, and 24mm spindles easily fit through the shell, allowing for large bearings to be employed in the outside cups. Put more of your energy into forward motion by reducing frictional drag wherever you can. CeramicSpeed Standard Bearings typically have frictional drag of 0.3-0.4 watts per set. That's in the range of a 75% drag reduction compared to standard bottom brackets. CeramicSpeed balls are 100% smoother and 15% harder than ceramic competition. The bearings last at least 3x longer than other bearings. In The Box: - 2 threaded cups with bearings - 2 dust covers with built-in spacers - Spacer tube - 10mm syringe of All Round Grease - Sticker sheet

BSA comes from Birmingham Small Arms, aka English threading. English threading on mountain bikes means a 73mm-wide, 34mm-inside-diameter shell with reverse threading on the drive side. It's the most common threaded standard employed today. This kit allows you to fit 30mm cranks, like those from Rotor or RaceFace, to fit in the tight space of this 30mm spindle. CeramicSpeed Coated Bearings are hand-built with unique CeramicSpeed Ceramic Balls installed on coated, hardened-steel races for longer life and less bearing drag compared to standard bearings. In The Box - 2 threaded cups with bearings installed - 2 1mm spacers - 2 0.5mm spacers - 2 dust covers - O-ring - 10ml syringe All Round Grease - Sticker sheet

The PF30 standard has opened design possibilities for mountain bikes. Our CeramicSpeed PF30 Shimano MTB Bottom Bracket gives you the ability to install Shimano and other 24mm diameter spindle cranks on your PF30 MTB. Our PF30 cups have extended sleeves and join with a center section, reducing the likelihood of creaking and increasing the reliability of the system. There is both a Standard and Coated version. Both feature super smooth CeramicSpeed Balls and hardened-steel races. The CeramicSpeed Coated Bearings have an additional benefit: a 3-micron thick metallic layer over the races. This addition makes the races harder and smoother, lowering drag and increasing life. The CeramicSpeed Standard Bearings have only 0.3-0.4 watts of frictional drag per set, an average drag reduction of 75% compared to stock bottom brackets. This is the result of great design, including hardened-steel races and CeramicSpeed Balls that are 100% smoother and 15% harder than the ceramic competition. They also last longer. If you want longer life and even lower drag, opt for the CeramicSpeed Coated Bearings. Life increases by 60% and drag drops by 50% compared to our CeramicSpeed Standard Bearings. Performance can be tuned by changing the grease. LongLife Grease comes installed, but can be changed for lower-drag All Round Grease for lower drag and cleaner riding conditions. In The Box - 1 bottom bracket with CeramicSpeed bearings installed - 2 dust covers - 5 0.85mm spacers - 10ml syringe of LongLife Grease - Sticker sheet

Developed and designed entirely by CeramicSpeed, the Oversized Pulley Wheel System for Campagnolo is advanced for the optimization of bike performance. Everything from bearings to the cage is made from the highest quality materials. The oversized aluminum pulley wheels are fitted with standard or coated CeramicSpeed Bearings, which reduce friction to the minimum. The 13-tooth/19-tooth OSPW for Campagnolo provides 40% lower friction over a standard 11-tooth Campagnolo pulley wheel and fits up to a 32-tooth cassette. The OSPW for Campagnolo is compatible with all Campagnolo electronic rear derailleur (EPS) and all rear derailleurs with a mounting sleeve—no matter the age and model. At this point, this OSPW System is not compatible with the Campagnolo 12-speed Record and Super Record derailleurs. The OSPW for Campagnolo is compatible with: - Record mechanical - Record EPS - Super Record mechanical - Super Record EPS - Potenza mechanical - Chorus Please note, some models of Campagnolo rear derailleur, including all EPS models, do not feature a B-limit adjustment. While this product is still compatible with those derailleurs, it may not be possible to fit a 32 tooth cassette successfully on some bikes. When travelling, please remember to dismount your entire rear derailleur with an Allen key, as the OSPW System will not safely fit in most bike travel bags and could be damaged if left on. In The Box: - Oversized Pulley Wheel System - CeramicSpeed Bearing Oil in 15ml dropper bottle - Sticker sheet

Developed and designed entirely by CeramicSpeed, the Oversized Pulley Wheel (OSPW) System for Shimano 9000/6800 provides the ultimate optimization of your bicycle's drivetrain. This OSPW System features a set of 17-tooth aluminum Pulley Wheels housed in a specially designed polyamide (PA) and carbon cage. The upper and lower 17-tooth oversized aluminum pulley wheels come fitted with either standard or coated CeramicSpeed Bearings. The Oversized Pulley Wheel (OSPW) System is the product of choice by many of the world's leading cycling teams and triathletes. This specific system is compatible with Ultegra 6700/6770/6800/6870 mechanical and Di2 rear derailleurs and Dura Ace 7900/7970/9000/9070 mechanical and Di2 rear derailleurs. It is not compatible with Shimano Dura-Ace 9100/9150 and Ultegra 8000 series rear derailleurs. For those rear derailleurs you will need a OSPW System for Shimano 9100 series. The system is compatible with up to a 28-tooth cassette on most bikes, depending on derailleur hanger. The typical overall power savings of the OSPW System for Shimano 9000/6800 is 30%-60% over a stock setup, and the oversized pulley wheels have a lifespan that is 3-5 times longer than the commonly used standard pulleys on the market. In The Box: - A complete 17-tooth OSPW System - CeramicSpeed bearing oil in 15ml dropper bottle

Why We Make This The simple answer is that many contemporary bicycle frame designs call for the headset bearings to ride inside the frame’s headtube. After decades of making press-in bearing headsets, we needed to make headsets that worked in these newer frames. From the beginning we understood that integrated headsets posed a unique challenge in that the bearings are not pressed into a cup and sit loosely in the frame. When bearings are not pressed securely into a cup they shift and move, rapidly losing preload. As preload drops, the bearings are more susceptible to creaking, damage, and failure. That’s a problem we know how to solve. Why You Want It Enter, our patented GripLock™ bearing cap. The GripLock™ preloads the headset independently of clamping onto the steerer, so it retains preload far better than the competition and is impervious to the ill effects of load spikes from large hits and heavy braking. This means smoother steering, no more creaking, and a longer lasting headset. Our GripLock™ design also takes the guesswork out of preloading a headset, because the bearing preload force is independent of the clamping force. Our headsets can be preloaded to a torque spec. Compatible with Santa Cruz, Yeti, Alchemy, Santa Cruz Stigmata (without baseplate), Ibis Hakka MX, and more. - Engineered, manufactured and assembled in Portland, Oregon USA - King Lifetime Warranty - Legendary made-in-house bearings - Patented GripLock® retention design for dependable headset adjustment (US Patent 8662517) - 41mm 45x45 upper bearing - 52mm 36x45 lower bearing - Compatible with the included baseplate and 36 degree integrated crown races

Why We Make It Maybe we’re just a bunch of old softies, but the GripNut told the world we meant business when it came to headsets, and there are still a kajillion of them out in the world, giving good, daily service. It’s hard to talk about sustainability and not keeping making a cornerstone product like this one. Why You Want It You want to ride that classic bike of yours forever, and we don’t blame you. Our GripNut™ headset is designed for threaded forks that don’t require a cable hanger or additional spacers, allowing us to build a low stack height threaded headset with a unique collet locking system that stays securely adjusted. Every Chris King headset is built with our heat-treated bearings, and surgical-grade steel races machined simultaneously to ensure they are perfectly matched. As Chris King bearing tracks age and burnish, they actually get smoother, and all headsets are fully serviceable for years upon years of demanding riding. External upper and lower cups with the iconic, Chris King rounded profile adds timeless style to even the most modern bike. - Engineered, manufactured and assembled in Portland, Oregon USA - King Lifetime Warranty - Legendary made-in-house bearings - GripNut™ proprietary collet retention system - Options for 1” or 1-1/8” straight steerer tubes

The Inset headset offers Chris King's trademark quality and durability in a low-stack configuration sized for contemporary headtube dimensions. King's legendary made-in-house bearings still form the centerpiece of the Inset headsets, with precisely machined aluminum cups and headset caps available in all ten classic Chris King colors. The Inset 2 is compatible with tapered 1-1/8 - 1-1/2-inch forks and frames using a 44/56mm headtube.

Why We Make This Contemporary bicycle frame designs are incorporating larger diameter headtubes and forks with tapered-steerers to improve the bike’s front end stiffness, and as a result handling accuracy. This move has made particular sense for off-road bikes. We evolved the form and function of our legendary NoThreadset to address the variety of tapered steerers and headtubes on the market today. Why You Want It Every Chris King headset is built with our heat-treated bearings, and surgical-grade steel races machined simultaneously to ensure they are perfectly matched. As Chris King bearing tracks age and burnish, they actually get smoother, and all headsets are fully serviceable for years upon years of demanding riding. Built for the next generation of tapered road forks the Chris King InSet™ 8 is built to fit contemporary road and cross bikes that utilize 1-1/8” to 1-1/4”tapered steerer tubes and a 44mm headtube. Our InSet™ 8 combines our exclusive Chris King built bearings and our GripLock® retention system for unequalled riding quality. - Engineered, manufactured and assembled in Portland, Oregon USA - King Lifetime Warranty - Legendary made-in-house bearings - Patented GripLock® retention design for dependable headset adjustment (US Patent 8662517) - Responsibly lightweight - Designed specifically for a 44mm straight headtube and a 1-1/8” to 1-1/4” tapered steerer tube

Why We Make This Headtube and fork steerer standards have proliferated in recent years, but for a long, long time these variables were more fixed, so we made thousands upon thousands of NoThreadsets™ to serve bikes with unthreaded fork steerers. We made them in a variety of diameters, and everyone was happy in the land. We still make it, because it’s still a great headset for all those bikes that are still rolling through the world with a headset that will never die. Why You Want It For decades our NoThreadSet™ set the standard for quality headset function delivering precision performance to numerous world champions, grand tour winners, and aspiring riders around the world. Every Chris King headset is built with our heat-treated bearings, and surgical-grade steel races machined simultaneously to ensure they are perfectly matched. As Chris King bearing tracks age and burnish, they actually get smoother, and all headsets are fully serviceable for years upon years of demanding riding. - Engineered, manufactured and assembled in Portland, Oregon USA - King Lifetime Warranty - Legendary made-in-house bearings - Patented GripLock® retention design for dependable headset adjustment (US Patent 8662517) (1-1/8” only) - Available in 8 beautifully anodized colors in both bold and sotto voce marking options - Responsibly lightweight - Options to fit 1” and 1-1/8” straight steerer tubes

Why We Make This Our tapered NoThreadSet™ brings our classic profile to the world of tapered headtubes. The NoThreadSet™ is built to be precise and dependable and sets the standard for quality headset function delivering precision performance to numerous world champions, grand tour winners, and aspiring riders around the world. Why You Want It Every Chris King headset is built with our heat-treated bearings, and surgical-grade steel races machined simultaneously to ensure they are perfectly matched. As Chris King bearing tracks age and burnish, they actually get smoother, and all headsets are fully serviceable for years upon years of demanding riding. External upper and lower cups with the iconic, Chris King rounded profile adds timeless style to even the most modern bike. - EC34/EC44 for 1-1/8" to 1-1/4" tapered steerer - Engineered, manufactured and assembled in Portland, Oregon USA - King Lifetime Warranty - Legendary made-in-house bearings - Patented GripLock® retention design for dependable headset adjustment (US Patent 8662517) (1-1/8” only) - Available in 8 beautifully anodized colors

Chris King ThreadFit 30 bottom brackets are designed and built to be durable, serviceable, and silent. Bearings can be serviced with the Chris King Grease injector tool. - King made-in-house bearings - 5-year warranty - Included Fit Kit #1 is designed to mate the ThreadFit 30 bottom bracket with a DUB MTB 28.99mm spindle - Spindle Interface Type: SRAM DUB - BB Shell Width (mm): 68 , 73 - Bottom Bracket Shell I.D.: 1.37 - BB/Frame Interface: English

Chris King ThreadFit 30 bottom brackets are designed and built to be durable, serviceable, and silent. Bearings can be serviced with the Chris King Grease injector tool. - King made-in-house bearings - 5-year warranty - Included Fit Kit #2 is designed to mate the ThreadFit 30 bottom bracket with a DUB road 28.99mm spindle - Spindle Interface Type: SRAM DUB - BB Shell Width (mm): 68 - Bottom Bracket Shell I.D.: 1.37 - BB/Frame Interface: English

Chris King ThreadFit 30 bottom brackets are designed and built to be durable, serviceable, and silent. Bearings can be serviced with the Chris King Grease injector tool. - King made-in-house bearings - 5-year warranty - Included Fit Kit #3 is designed to mate the ThreadFit30 bottom bracket with a 30mm spindle - Spindle Interface Type: RaceFace/Easton CINCH , 386 EVO , e*Thirteen P3 Connect , Rotor 3D+ , Zipp Vuma - BB Shell Width (mm): 68 , 73 - Bottom Bracket Shell I.D.: 1.37 - BB/Frame Interface: English

The Chris King ThreadFit T47 24i Bottom Bracket provides the security and reliability of a threaded bottom bracket with the stiffness and power transfer gains of a PressFit 30 bottom bracket shell. - ThreadFit T47 24i fits 86mm and 92mm shell widths with 24mm spindles - Legendary made-in-house bearings - Easily serviceable with a grease injection tool - King Lifetime Warranty - Included Fit Kit #6 is designed to mate the ThreadFit T47 24i bottom bracket with a GXP spindle - Spindle Interface Type: SRAM/Truvativ GXP - BB Shell Width (mm): 86 , 92 - Bottom Bracket Shell I.D.: 47 - BB/Frame Interface: T47